Ethernet AC monitor + eMail

Ethernet AC monitor + eMail

The Ethernet AC monitor+email accepts 12Vdc to 24Vdc from a standard 2.5mm Barrel DC jack connector.

The board monitors the 12 VDC or 24Vdc  input power , the status of 1 x 110 / 220 VAC input and permits the monitoring and control of the on board relay, all this information is available in the embedded web pages and SNMP.

The Ethernet AC monitor + email will email and cc the programmed addresses as soon as the 110/220 Vac input changes state or if the DC input goes under or over user programmed levels

The on board Relay can be controlled via web browser and can be selected by a pcb jumper to either do a reset function for 8sec to reset remote equipment or to switch and keep its position until changed by the user to switch remote equipment on or off.

Ethernet AC Monitor+email accepts 12Vdc to 24Vdc

The unit supports the SNMP V1 and SNMP V2C communication protocol to be compatible with the free Mi_SNMP-Monitor or any other SNMP monitoring software.

Download user manual: 

 

 

Our Site Monitoring products permit the monitoring and control of equipment at remote sites with IP connectivity in the comfort of your office.The AC Monitor+email is the perfect addition to any remote site to monitor equipment via Ethernet + SNMP.
The AC Monitor+email assist Network specialists with power related information via Ethernet + SNMP Communication.

*

We offer a absolute free of charge SNMP "plug and play"  windows software package to our customers that is free to download , software package is easy to setup and install even with no SNMP knowledge, Monitors all Micro Instruments remote network power monitors as well as a ping function for other related network equipment.

Reviews

There are no reviews yet.

Be the first to review “Ethernet AC monitor + eMail”