Ethernet Dual AC monitor

Ethernet Dual AC monitor

The board accepts 12Vdc to 24Vdc  from a standard 2.5mm Barrel DC jack connector.

The user can now monitor the status of the Mains supply and the status of a Generator, Inverter or UPS.

The board can also be used to get the status of pre-paid electricity meters, if funds have run out or if the incoming voltage failed.

The board monitors the 12 VDC or 24 VDC  input power , the status of 2 x 110 / 220 VAC inputs and permits the monitoring and control of the on board relay, all this information is available in the embedded web pages and SNMP.

The on board Relay can be controlled via web browser and can be selected by a pcb jumper to either do a reset function for 8sec to reset remote equipment or to switch and keep its position until changed by the user to switch remote equipment on or off.

Ethernet dual AC monitor accepts 12Vdc to  24Vdc

The unit supports SNMP V1 and SNMP V2C communication protocol to be compatible with the free Mi_SNMP-Monitor or any other SNMP monitoring software.

Download user manual: 

Our Site Monitoring products permit the monitoring and control of equipment at remote sites with IP connectivity in the comfort of your office.The Ethernet Dual AC monitor is the perfect addition to any remote site to monitor equipment via Ethernet + SNMP.
The Ethernet Dual AC monitor assist Network specialists with power related information via Ethernet + SNMP Communication.


We offer a absolute free of charge SNMP "plug and play"  windows software package to our customers that is free to download , software package is easy to setup and install even with no SNMP knowledge, Monitors all Micro Instruments remote network power monitors as well as a ping function for other related network equipment.


There are no reviews yet.

Be the first to review “Ethernet Dual AC monitor”